CAME BPT TH/PLUS, Руководство по установке и пусконаладке

Страница: 26 / 64

B
p.
10
- M
an
ua
l
FB
00
82
3-
EN
v.
1
- 0
7/
20
17
- © C
am
e S
.p
.A
. - T
he c
on
te
nt
s o
f t
hi
s m
an
ua
l m
ay b
e c
ha
ng
ed
, a
t a
ny t
im
e, a
nd w
ith
ou
t n
ot
ic
e.
For each of the system's thermal zones, you can enable one or more of the functions of the thermal device that the zone
controls.
Configurable property
Type of device for thermal control
TH/PLUS - TS/4.3 OH/Z.02 TA/P1 OH/SRI OH/SRE OH/MT2
Humidity control
Humidity threshold
Temperature threshold
Remote sensor
Type of connectable sensor TH/PLUS - TS/4.3 OH/Z.02 TA/P1 OH/SRI OH/SRE OH/MT2
PT1000
BPT
Window contact
- [Humidity control] enables control of the humidity level in the chosen zone.
- [Upper humidity threshold] and [Lower humidity sensor] enable the triggering of an alarm if the upper and lower hu-
midity thresholds are exceeded. The threshold values can be set later by users and the exceeding of the preset thresholds
can trigger event alerts.
- [Upper temperature threshold] and [Lower temperature threshold] enable the triggering of an alarm if the upper and
lower temperature thresholds are exceeded. The threshold values can be set later by users and the exceeding of the preset
thresholds can trigger event alerts.
-
[Remote sensor]
enable use of the auxiliary input - found on some thermal devices - that can be used for the following
functions:
-
[Window contact]
to enable when the input is used for deactivating control of the thermal zone (OFF).
-
[Aux. sensor]
this property is currently unavailable.
- [Ext. sensor] to enable when a remote sensor - connected to the input - detects the temperature at a different point
form that where the thermal device is located. The datum detected by this sensor is used to view and control the thermal
device.
☞
There is a choice of sensors that can be connected to the input.
Once you have configured the properties of the thermal devices, press icon to return to the thermal-devices menu to
configure the system for winter and summer.
Configuring the thermal sensor
Properties
TH/PLUS Remote Sensor
BPT Auxiliary sensor
PT1000 Auxiliary sensor
BPT External sensor
Press the mailbox next to the properties that you want to en-
able
A
.
If the selected property requires configuring additional op-
tions, another screen view will appear
B
.
Press the mailbox next to the property that you want to en-
able.
Once you have configured the properties of the connected
devices, press icon to return to the previous menu.