T3
T2
T1
ON
0
4
8
12
16
20
0
23
1
7
C
1 2 3 4 5 6 7
T3
T2
T1
ON
0
4
8
12
16
20
0
23
1
7
C
1 2 3 4 5 6 7
C
D
T3
T2
T1
ON
0
4
8
12
16
20
0
23
1
7
C
1 2 3 4 5 6 7
A
1 2 3 4 5 6 7
T3
T2
T1
ON
0
4
8
12
16
20
0
23
1
7
C
B
Page
11
- Manual code
FB00804-EN
- Ed.
1
- 07/2017 - © C
ame S.p.A. - The cont
ents of this manual ar
e t
o be consider
ed as subject t
o change at any time and without the need for any advance warning.
Note. The value that can be assigned to each temperature range is limited by the values of
the range immediately above and below. If, for example, range T3 is set at 20°C and range
T1 is set at 16°C, the value of range T2 can vary between 16.1°C and 19.9°C; if T2 is set at
21°C T3 is automatically taken up to 21.1°C.
Use buttons 0÷23 to move
the flashing indicator to hour 0 on
the daily programme graphic
B
.
Use buttons 1÷7 to move the day
indicator to position 1 (Monday)
A
.
The block relating to the selected
day flashes.
Customising the temperatures for the daily programme
Then press button 0÷23 to move
on to the next time and also select
the desired temperature
D
.
Using buttons
C
select the
desired temperature range.
Note. During programming, the clock shows the time indicated by the flashing segment,
the colon between hours and minutes does not flash and the temperature icon shows the
level selected.
