PP8S
ﺔﺤﻔﺻ
21
ﻦﻣ
35
The current firmware version on the hub is displayed in the firmware updater section alongside
the hubs name. This will appear red if a newer version is available or green if it is the most up to
date
.
To install the firmware onto the hub simply click the hub/ hubs connected that you want to
update and then select the firmware version you want to upgrade to. Once selected press the
update button at the top and the update will commence
.
رﺬﺤﻟا
Your Cambrionix Firmware may get corrupted
l
Do not interrupt the Firmware update process
l
Do not disconnect the power during the update process
5.5.7
Command Line Instructions (CLI
(
Command Line Instructions can be used to control and monitor the functions of the
hub and attached devices. In order to use the command line interface a serial terminal
emulator must be installed on the host computer. Examples include Serial, ZTerm, PuTTy, and
Minicom. If you would like more information please look at our more in depth information here
www.cambrionix.com/cli
Two example commands can be seen below, you can use these commands to check hub
information and health
.
