CAMBRIDGE SENSOTEC Rapidox 1100E, Инструкция по эксплуатации

Страница: 6 / 49

Cambridge Sensotec Rapidox 1100E Oxygen Analyser Instruction Manual
Version 3.8 2 Last printed 29/08/2012 16:01:00
3 Technical Specification
Property Specification
Supply Voltage 90-260VAC, 50/60Hz
Power consumption 10W max
Analyser dimensions 250mm X 263mm X 150mm
Weight 3.5 kg
Display
16
×
2 character (9mm) back lit LCD
Warm up time 5 minutes at 20°C
Normal operating temperature 5-35°C
Operating pressure range 800 to 1200mbar absolute
Absolute maximum pressure range 500 to 1500mbar absolute
Range of measurement 0-100% O
2
in steps of 0.01%
Accuracy
±
1% of the full scale
Outputs: O
2
& pressure
0-10V (user-programmable) into minimum
5k
Ω
O
2
& pressure
4-20mA current loop (user-programmable)
into maximum 500
Ω
Programmable alarms Relay circuits – fully user-programmable
All data and parameters
RS232 (or RS485) - data streamed on
demand
Sample Pump
Mains type diaphragm vacuum pump
(variable flow) with on/off switch on rear
panel.
Flow Rate Typically 0-1.5 L.min
-1
in 10 steps
Max. gas temperature on input 50°C
Calibration
Requires 2 user-selectable gas
compositions (air is default plus another)
Table 1: Technical specification
4 Precautions
Make sure you read and understand these instructions and keep them safe for later
use. The unit should not be exposed to extreme temperatures < -5°C or > 50°C.
Normal operating temperature is 5-35°C. Avoid direct sunlight. Do not use liquid
cleaners, aerosols or solvents to clean the case. Use a damp cloth for cleaning. Do
not use this equipment near water. Avoid touching the LCD display as this may
cause permanent damage. Make sure the rear ventilation slots and the fan on the
rear panel are free of obstruction. There are no user serviceable parts in this unit.
Do not attempt to repair yourself. Refer all servicing to qualified Cambridge
Sensotec personnel.
5 Warning
This unit is NOT designed for use in life support situations. No responsibility can
be held for injury or loss of life caused by inappropriate use of this equipment.