CAMBRIDGE SENSOTEC Rapidox 1100E, Инструкция по эксплуатации

Страница: 5 / 49

Cambridge Sensotec Rapidox 1100E Oxygen Analyser Instruction Manual
Version 3.8 1 Last printed 29/08/2012 16:01:00
1 Introduction
The Rapidox 1100E oxygen analyser gives accurate oxygen analysis over the
oxygen range 0 to 100% O
2
with a resolution of 0.01%. The analyser provides
continuous on-line oxygen analysis, with a typical response time of less than 20
seconds for a 90% response to a step change in gas compositions.
The Rapidox 1100E is a fully integrated unit complete with a powerful diaphragm
pump to provide gas sampling at up to approximately 1.5 litres per minute.
The sensor head is located inside the analyser and comprises a long-life
electrochemical sensor. An internally mounted pressure sensor compensates for
any fluctuations in pressure caused by differing flow conditions.
The analyser is packed with features including programmable alarm circuits,
programmable analogue outputs, easy calibration (user selectable gases), RS232
communications and complete communications / data-logging software.
2 Features

Continuous gas sampling via powerful internally located pump.
 Fast measurement response (typically 20 seconds for a 90% response) .

Wide measurement range available (0 to 100% O
2
) .

High accuracy maintained throughout the measurement range. Accuracy ±
1% of the full scale.

Easy calibration procedure requiring any two gas mixtures (ordinary room air
is usually one).

Low maintenance, sensor life expectancy typically 3-5 years.

Large back-lit LCD display (16 x 2 characters).

RS232, 0-10V and 4-20mA current loop outputs (both fully programmable) .

Fully programmable alarm circuits.

Full data-logging software accessed via RS232 connection to a PC (RS485
available on request).
 PIN code protected menu access.

Printer and transport Peli-case options.