page 23
Qt Conference Room Edition Installation and Operations Guide
INSTALLATION
Mounting on glass plus using “hider” plate for other side of glass surface
Best practices – it’s best to use self-adhesive tape, NOT a 1-gang box (because of sound transmission
issues).
If mounting the signs to either side of the same wall, don’t locate the boxes closer than 2 ft. from each
other.
Caution:
The self-adhesive pads are very strong - take care in placing as moving after placement may be
difficult. Also note, special care may be required if mounting to glass with an adhesive film coating.
Note:
The hider plate is ABS plastic and may be painted to a desired color if needed. Use a standard
spray primer (Krylon) before painting.
Privacy sign
Self-adhesive pads
Wire
Glass surface
Hider plate
Self-adhesive pads