CAMBRIDGE CXUHD, Руководство пользователя

Страница: 5 / 22

10
Connecting to a wireless network
Note:
• The built-in wireless module is compatible with 802.11B, G, N (2.4GHz),
802.11A, N, AC (5GHz).
• Make sure the broadband Internet connection is available and the Wi-Fi function
on your wireless router or access point has been turned on.
• After connecting, some network configuration is required. Please refer to the
'Network Setup' section of this manual.
30. Subtitle
Press to access subtitles where available.
31. Repeat
Press to access Repeat function. Each press will cycle as follows:
DVD / DVD-Audio : Repeat Chapter, Repeat Title, Repeat All, Repeat Off.
Blu-ray Disc : Repeat Chapter, Repeat Title, Repeat Off.
CD / SACD : Repeat One, Repeat All, Repeat Off.
32. Dim
Adjusts the brightness of the front panel display.
33. Zoom
Press to cycle through the various zoom magnifications (and back to normal
display).
Note: Zoom features may not be available with certain DVD or Blu-ray discs.
34. Res
Press to switch the output resolution to the TV.
Connecting to a wired network
The CXUHD supports the BD-Live feature offered on some Blu-ray Disc titles.
BD-Live offers extra downloadable content and additional online interactive
programs. The available BD-Live content varies by disc and studios, and may
include additional subtitles, commentaries, movie trailers, games, and/or online
chat.
Connecting the player to the Internet will also allow the player to obtain firmware
updates via the Internet.
If the network storage drives or servers conforming to the UPnP A/V or DNLA
standards are connected to the network, these can also be accessed.
In order to utilize the BD-Live feature or update firmware via the Internet, the player
needs to be connected to a broadband Internet connection. It is not necessary to
connect to the Internet if you do not intend to use the BD-Live and online firmware
updating functionality and only wish to use UPnP/DNLA.
Plug one end of a network cable (Category 5/5E straight through Ethernet cable)
into the LAN port on the back of the unit.
Plug the other end of the network cable into a LAN port on your broadband router
or modem.
If you do not use DHCP (Auto IP), some network configuration may be required.
Please refer to the Network Setup section of the manual for more details.
Refer to the operating instructions supplied with the broadband router or modem,
or contact the Internet service provider for questions related to setting up of a router
or modem.
Note: Only connect the LAN port of the player to an Ethernet port and support up
to 1000 BASE-TX.
Remote control cont.
Ethernet connection
Internet
Network cable (ethernet)
Broadband Internet connection
Broadband
router/modem
Broadband Internet connection
Wireless broadband
router/modem
Wireless aerial
Internet