CAMBRIDGE CSW-10AT, Инструкция по установке и эксплуатации

Страница: 9 / 16

2
.
4
Numeric Entries
When entering a numeric value, First press and release the
lb/kg
key to move
right into the menu where the numeric value will be entered. Then press and release
the
Zero
key, the first digit in the value will flash. Press and release the
ZERO
and
GRS/NET
keys to increase or decrease the digits value. Press and release the
Tare
key to move to the next digit. Repeat the steps above to adjust the digits value.
Repeat all steps until the numeric value is correct, then press and release the PRINT
key to enter the data. The display will return to the menu.
2
.
5
Set Up Parameters
To begin press and hold the
GRS/NET
key until the Parameter
(
Pxxx
) Event
counter is displayed, then release. Immediat e ly after
COdE
is
displayed
,
(within
5
seconds
) enter in sequence
Tare, lb/kg , GRS/NET ,
and
Print/Enter
, The display
will indicate
ScAlE
.
-P xxx and C xxx are event counters that will increment each time one or more
changes are made to the Scale or Calibration Parameters.
With the display indicating
ScAlE
, press the
GRS/NET
key to move down. This
allows the operator to change any of the scale Parameters
S1
thru
S17
. For example,
press the
GRS/NET
key to move down until
S2
is displayed,
S2
is used to set the
Capacity of the Scale. Press the
lb/kg
key to move right in the
S2
Parameter. The
current capacity will be displayed. Press the
ZERO
key
;
the first digit will flash.
Enter the capacity using the steps described in section 1.3. When the capacity is
correct, press the
Print
key to enter the value. The display will return to
S2
.
Entering the Count By. Press the
GRS/NET
to move down,
S3
will be displayed.
Press the
lb/kg
key to move right into this parameter. The current "Count by" will be
displayed. Press the
ZERO
and
GRS/NET
keys to adjust the divisions. Press the
Tare
and
lb/kg
keys to adjust the decimal point. Press the
PRINT
key when finished to enter
the data. The display will return to
S3
. Exit Set up Mode by pressing the
Tare
Key,
End
will be displayed, then press
Print/Enter
.
CAMBRIDGE SCALE WORKS, INC. 9 MANUAL P/N 5999-1014-01