CAMBRIDGE CSW-10AT-CS Скачать руководство пользователя

Страница: 9 / 18

1.3 Scale Menu Definitions Continued:

S11

Zero Delay 0 to 99 updates (4) the weight display must be within

the zero band for the selected number of updates to
be considered Zero.

S12

Zero Tracking 1 to 99 divisions (2) the number of graduations

allowed to be Automatically Zeroed off.

S13

Tracking Delay 0 to 99 [15second increments] (10) the amount of

time the display must be within the allowed
graduations before it will be automatically Zeroed.

S14

Lb/Kg (Lb/KG): Allows the indicator to be switched between pounds

and kilograms by pressing the lb/kg key.
LB: This sets the display to Pounds only.
Kg: This sets the display to Kilograms only.

S15

Scale ID (1) to 99 scale ID used in RF link output.

S16

Brightness 0 to (15) adjusts the LED display intensity 15 is

the brightest.

S17

Sleep Mode (0) to 30 minutes. The display will turn off after the

the set amount of time elapses with no scale activity.

END

Exits back to the main Menu.

( ) indicates Factory Set defaults.

MANUAL P/N: 5999-1021-01 (8/11)

Содержание CSW-10AT-CS



















Результаты поиска

Содержание CSW-10AT-CS

Отзывы:

Похожие инструкции для CSW-10AT-CS

Бренды по названию

Популярные бренды

CAMBRIDGE CSW-10AT-CS, Настройка и эксплуатация

Результаты поиска

Содержание CSW-10AT-CS

Отзывы:

Похожие инструкции для CSW-10AT-CS

Бренды по названию

Популярные бренды