Cambridge Sensors MicroDot Xtra, Операции

Страница: 13 / 31

TESTING WITH PATIENTS
This section describes the procedure to test patient blood samples using the
Microdot® Xtra Blood Glucose System.
Operating Guidelines
Before attempting to test with real blood, make sure you have performed control solution
tests correctly to ensure the meter and test strips are performing properly and to verify technique.
Use the test strips before their expiration date and within three months after opening.
Do not use test strips that are wet, bent, scratched or damaged. Use each test strip immediately
after removing it from the vial.
Patient Test Procedure:
What You Do
Notes
1. Press the C button
to turn the meter on
and/or insert test strip
by pushing the two
contact bars in firmly.
To verify all display symbols are working,
all symbols should appear at the same
time. If any of the symbols are missing
or do not display completely, contact
Cambridge Sensors USA at
(877) 374-4062
2. Obtain a drop
of blood.
Using a safety lancet, lance the side of the
finger to obtain a rounded blood sample.
Avoid squeezing the puncture site
excessively.
Chapter 4
11
Cambridge Sensors USA, LLC
BLOOD GLUCOSE MONITORING SYSTEM
IN-SERVICE FORM
The Health Care professionals listed below are trained and have demonstrated
proficiency using the Microdot Xtra Blood Glucose Monitoring System.
Cambridge Sensors Representative/Qualified Trainer
Date
Health Care Professional’s Name
The chart is designed for use during the initial training on the Microdot Xtra Blood Glucose System by a
Cambridge Sensors Representative, In-Service Video or Qualified Trainer.
Chapter 7
16
Cambridge Sensors USA, LLC
®
Xtra