Cambridge Audio Stream Magic 6 Скачать руководство пользователя страница 4

Страница: 4 / 50

Ventilation

,03257$17

– The unit will become hot when in use. Do not stack multiple units

on top of each other. Do not place in an enclosed area such as a bookcase or in a

FDELQHWZLWKRXWVXIÀFLHQWYHQWLODWLRQ

Ensure that small objects do not fall through any ventilation grille. If this happens,

switch off immediately, disconnect from the mains supply and contact your dealer

for advice.

Positioning

Choose the installation location carefully. Avoid placing it in direct sunlight or close

WRDVRXUFHRIKHDW1RQDNHGÁDPHVRXUFHVVXFKDVOLJKWHGFDQGOHVVKRXOGEH

placed on the unit. Also avoid locations subject to vibration and excessive dust,

cold or moisture. The unit can be used in a moderate climate.
This unit must be installed on a sturdy, level surface. Do not place in a sealed area

such as a bookcase or in a cabinet. Do not place the unit on an unstable surface or

shelf. The unit may fall, causing serious injury to a child or adult as well as serious

damage to the product. Do not place other equipment on top of the unit.

'XHWRVWUD\PDJQHWLFÀHOGVWXUQWDEOHVRU&5779VVKRXOGQRWEHORFDWHGQHDUE\

due to possible interference.
Electronic audio components have a running in period of around a week (if used

several hours per day). This will allow the new components to settle down and the

sonic properties will improve over this time.

Power sources

the marking label. If you are not sure of the type of power-supply to your home,

consult your product dealer or local power company.
This unit can be left in Standby mode when not in use and will draw <0.5W in this

state. To turn the unit off, switch off at the rear panel. If you do not intend to use

this unit for a long period of time, unplug it from the mains socket.

2YHUORDGLQJ

'RQRWRYHUORDGZDOORXWOHWVRUH[WHQVLRQFRUGVDVWKLVFDQUHVXOWLQDULVNRIÀUH

or electric shock. Overloaded AC outlets, extension cords, frayed power cords,

damaged or cracked wire insulation and broken plugs are dangerous. They may

UHVXOWLQDVKRFNRUÀUHKD]DUG

Be sure to insert each power cord securely. To prevent hum and noise, do not

bundle the interconnect leads with the power cord or speaker leads.

Cleaning

To clean the unit, wipe its case with a dry, lint-free cloth. Do not use any cleaning

ÁXLGV FRQWDLQLQJ DOFRKRO DPPRQLD RU DEUDVLYHV 'R QRW VSUD\ DQ DHURVRO DW RU

near the unit.

%DWWHU\GLVSRVDO

Batteries may contain substances harmful to the environment. Please dispose

of any discharged batteries with due consideration and in accordance with local

environmental/electronic recycling guidelines.

/RXGVSHDNHUV

Before making any connections to loudspeakers, make sure all power is turned off

and only use suitable interconnects.

6HUYLFLQJ

These units are not user serviceable. Never attempt to repair, disassemble or

reconstruct the unit if there seems to be a problem. A serious electric shock could

result if this precautionary measure is ignored. In the event of a problem or failure,

please contact your dealer.

Wi-Fi information

FCC Statement

&DXWLRQ([SRVXUHWR5DGLR)UHTXHQF\5DGLDWLRQ

The device shall be used in such a manner that the potential for human contact

during normal operation is minimized.
When connecting an external antenna to the device, the antenna shall be placed

in such a manner to minimize the potential for human contact during normal

operation. This transmitter must not be co-located or operating in conjunction with

any other antenna or transmitter.

)HGHUDO&RPPXQLFDWLRQV&RPPLVVLRQ1RWLFH

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation.
This equipment generates, uses, and can radiate radio frequency energy, and if

not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try and correct the

interference by one or more of the following measures:

5HRULHQWRUUHORFDWHWKHUHFHLYLQJDQWHQQD
,QFUHDVHWKHGLVWDQFHEHWZHHQWKHHTXLSPHQWDQGWKHUHFHLYHU
&RQQHFWWKHHTXLSPHQWWRDQRXWOHWRQDFLUFXLWGLIIHUHQWIURPWKDWWRZKLFKWKH

receiver is connected.

&RQVXOWWKHGHDOHURUDQH[SHULHQFHGUDGLR79WHFKQLFLDQIRUKHOS
)&& &DXWLRQ $Q\ FKDQJHV RU PRGLÀFDWLRQV QRW H[SUHVVO\ DSSURYHG E\ WKH

party responsible for compliance could void the user’s authority to operate this

equipment.

,03257$17127(
)&&5DGLDWLRQ([SRVXUH6WDWHPHQW

This equipment complies with FCC radiation exposure limits set forth for an

uncontrolled environment. This equipment should be installed and operated with a

minimum distance of 20cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other

antenna or transmitter.

*+] RSHUDWLRQ RI WKLV SURGXFW LQ WKH 86$ LV ÀUPZDUHOLPLWHG WR FKDQQHOV

through 11.

0RGLÀFDWLRQV

7KH)&&UHTXLUHVWKHXVHUWREHQRWLÀHGWKDWDQ\FKDQJHVRUPRGLÀFDWLRQVWRWKLV

device that are not expressly approved by Cambridge Audio, may void the user’s

authority to operate the equipment.

&DQDGD,QGXVWU\&DQDGD,&

This Class B digital apparatus complies with Canadian ICES-003
This device complies with Industry Canada licence-exempt RSS standard(s).

Operation is subject to the following two conditions: (1) this device may not

cause interference, and (2) this device must accept any interference, including

interference that may cause undesired operation of the device.
Under Industry Canada regulations, this radio transmitter may only operate using

an antenna of a type and maximum (or lesser) gain approved for the transmitter by

Industry Canada. To reduce potential radio interference to other users, the antenna

type and its gain should be so chosen that the equivalent isotropically radiated

power (e.i.r.p.) is not more than that necessary for successful communication.
This radio transmitter 9095A-651N01 has been approved by Industry Canada to

operate with the antenna types listed below with the maximum permissible gain

and required antenna impedance for each antenna type indicated. Antenna types

not included in this list, having a gain greater than the maximum gain indicated for

that type, are strictly prohibited for use with this device.

&$$QWHQQD5*&DEOH60$3OXJ5HYHUVHG%LƘ

This equipment complies with RSS-102 limits set forth for an uncontrolled

environment. This equipment should be installed and operated with a minimum

distance of 20cm between the radiator and your body.

DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC

COMPATIBILITY

We, Cambridge Audio, of Gallery Court, Hankey Place, London SE1 4BB,

declare under our sole responsibility that this device,