Incognito A-BUS keypad
11
Line-in/Line-out
connections
on subwoofer
Screened audio cable
Preamp
output
connections
on rear of
KP10
Gain adjust
The maximum output of the KP10 can be limited by turning these down. Alternatively, if the sound
level is too quiet, the Gain can be turned up.
Mode switch
Selects between AH10 mode and Standard A-BUS Ready/Incognito Ready mode.
Speaker output
Connect to a pair of speakers with two runs of standard high-quality speaker cable. Speakers of
at least 88 dB SPL for 1W @ 1 metre efficiency should be used with the KP10. Speakers from 4–8
ohms can be used. The Incognito SS10 speakers are an ideal match.
LK10 option
Allows control of source equipment via an LK10 Learning Keypad.
Preamp output
A preamp output is provided for optional use driving a powered subwoofer or auxiliary amplifier.
Connection from the preamp output to other equipment should be by screened audio cable (see
diagram below).
2
3
4
5
6
KP10
A-BUS keypad
