After holding both buttons down for a short
period, the second LED on the keypad will light
indicating that Bass adjust mode has been
activated. In this mode pressing the Volume
up/down keys will adjust the Bass (low
frequencies) level.
Continuing to hold both keys down will light the
third LED indicating that Treble adjust mode
has been activated. In this mode pressing the
Volume up/down keys will adjust the Treble
(high frequencies) level.
Continuing to hold both buttons will light the
fourth LED indicating that Balance adjust mode
has been activated. In this mode pressing the
Volume up/down keys will adjust the sound
level between the left and right speakers.
Continuing to hold both buttons will light the fifth LED indicating that Fader adjust mode has
been activated. In this mode pressing the Volume up/down keys will adjust the balance between
the main speakers and anything that is connected to the preamp output. This adjustment only
being relevant if the preamp output is used. The volume up and down buttons on the remote
control can also be used to adjust the sound in each mode.
Note: If no adjustment is made the system will automatically go back to volume adjustment after
two seconds.
Incognito A-BUS keypad
15
Bass
Treble
Balance Fader
KP10
A-BUS keypad
