OPERATING INSTRUCTIONS
Loading and unloading discs
1. Press the
Standby/On
switch.
2. Press the
Open/Close
button.
3. When the disc tray has opened fully, place a disc carefully in the tray
with the label side facing up.
4. To close the disc tray, press the
Open/Close
button again. When the
tray, with a correctly loaded disc, is fully closed the disc will start
turning automatically. After the CD player has read the disc it will be
ready to play. Pressing
Play
will also close the tray and start playing
the disc.
5. The disc tray can be opened at any time by pressing the
Open/Close
button. Only remove the disc after the tray has fully opened.
Note:
- Do not put anything except a Compact Disc into the tray, foreign objects
may damage the mechanism.
- Do not force the tray by hand during the opening and closing
operations.
- To avoid dirt and dust entering the mechanism, keep the disc tray
closed.
- If the Compact Disc is seriously scratched or too dirty the player may
not be able to read it or play it.
- Never load more than one disc into the disc tray at one time.
Normal disc play
1. Switch on your amplifier and set its input selector to the correct
position. Adjust the volume control to a minimum.
2. Press the
Standby/On
switch.
3. Press the
Open/Close
button to open the disc tray, and load a disc.
4. Press the
Open/Close
button again to close the tray. The CD player
will read the disc and enter Standby mode. Alternatively pressing
Play
will close the tray and start playing the disc.
5. Press the
Play
button. The disc will start playing from the beginning
of the first track. When the last track has finished playing, the CD
player will return to Standby mode.
6. To stop the disc at any point press the
Stop
button. Pressing the
Pause
button while the disc is playing will pause the disc. When the
disc is paused the display will flash, play can be resumed by pressing
the
Play
button again.
Locating a specific track
1. Ensure that a disc is loaded.
2. Pressing the right
Skip/Scan
(
Skip
on remote) button once will
forward the CD by one track. Repeat as necessary.
3. Press
Play
. The disc will play to the end of the disc and then return to
Standby mode.
4. Pressing the left
Skip/Scan
(
Skip
on remote) button will access the
previous track.
540C/640C V2.0
Compact disc player
Azur compact disc player
9
Содержание azur 640C V2.0
