Cambridge Audio azur 540R V2.0, Руководство пользователя

Страница: 16 / 32

16 Azur AV receiver
To avoid damaging the speakers with a sudden high-level signal, be sure
to switch the power off before connecting the speakers. Check the
impedance of your speakers. Speakers with an impedance of between
4 and 8 ohms (each) are recommended.
The coloured speaker terminals are positive (+) and the black speaker
terminals are negative (-). Make sure correct polarity is maintained at
each speaker connector or the sound can become weak and “phasey”
with little bass.
Prepare the speaker cords for connection by stripping off approximately
10mm (3/8”) or less (no more than 10mm, as this could cause a short-
circuit) of the outer insulation. Twist the wire tightly together so there are
no loose ends. Unscrew the speaker terminal knob, insert the speaker
cable, tighten the knob and secure the cable.
Note: All connections are made via loudspeaker cable, except if using an
active subwoofer which would be connected via a standard RCA phono
cable. Banana Plugs (4mm standard) connected to the speaker cable
are recommended for direct insertion into the speaker terminals.
LOUDSPEAKER CONNECTIONS
Power Rating:
230V AC 50Hz
Sur
Left
Sur
Right
Sur
Back
Left
Right
Centre
Reset
Power
On
Off
SB
SB
SW SW
Cen C
SR R
SL L
Power AC
Max Power Consumption :
615W
t In
6.1 Preamp Out
Cr/Pr Cb/Pb Y Cr/Pr Cb/Pb Y Cr/Pr Cb/Pb Y
Component Video In
DVD
Video 1/Video 2
Component Video Out
www.cambridge-audio.com
Designed in London, England
Speaker Impedance 4-8 Ohms
Control
Bus
Serial No. label fitted on underside
In
Front right
speaker
Front left
speaker
Surround
left speaker
Surround
right speaker
Front centre
speaker
Surround back
speaker
Powered
subwoofer
Phono/RCA cable