Cambridge Audio azur 540R V2.0, Руководство пользователя

Страница: 6 / 32

6 Azur AV receiver
Please take a moment to read these notes before installing your 540R
V2.0, as they will enable you to get the best performance and prolong
the life of the unit. Please retain these instructions for future reference.
Ventilation
IMPORTANT - The unit will become hot when in use. Please ensure that
there is ample ventilation around the unit. Leave at least 10cm of space
between the top, back and sides. Do not situate it on a rug or other soft
surface and do not obstruct the air inlet and outlet grilles on the
underside and top cover. Do not place in an enclosed area such as a
bookcase or in a cabinet.
Positioning
Choose the installation location carefully. Avoid placing it in direct
sunlight or close to a source of heat. Also avoid locations subject to
vibration and excessive dust, cold or moisture. Do not place the unit on
an unstable surface or shelf. The unit may fall, causing serious injury to
a child or adult as well as serious damage to the product. Do not place
a CD player or other equipment on top of the unit.
This unit must not be exposed to dripping or splashing water or other
liquids. No objects filled with liquid, such as vases, shall be placed on
the unit. In the event, switch off immediately, disconnect from the mains
supply and contact your dealer for advice.
Ensure that small objects do not fall through any ventilation grille. If this
happens, switch off immediately, disconnect from the mains supply and
contact your dealer for advice.
Electronic audio components have a running in period of around a week
(if used several hours per day). This will allow the new components to
settle down, the sonic properties will improve over this time.
Grounding and polarisation
The unit may be equipped with a polarised alternating current line plug
(a plug having one blade wider than the other). This plug will fit into the
power outlet only one way. This is a safety feature. If you are unable to
insert the plug fully into the outlet, try reversing the plug. If the plug
should still fail to fit, contact your electrician to replace your obsolete
outlet. Do not defeat the safety purpose of the polarised plug. (North
America Only)
Power sources
The unit should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of power-
supply to your home, consult your product dealer or local Power
Company.
This unit has been designed to be left in Standby mode when not in use,
this will increase the life of the amplifier (this is true with all electronic
equipment). If you do not intend to use this unit for a long period of time,
unplug it from the mains socket.
Power cord protection
Your power supply cord should be placed so that the power lead is not
likely to be walked on or pinched by items placed upon or against them,
paying particular attention to cords at wall plugs and where the power
lead exits from the unit.
Be sure to insert each power cord securely. To prevent hum and noise,
do not bundle the interconnect leads with the power cord or speaker
leads.
IMPORTANT SAFETY INSTRUCTIONS