2
Thank you for purchasing a Cambo product
The
AC-375 Full base tilt kit
is an additional kit to the Actus-B, Actus-G or
Actus-DB. This kit allows the front and rear standard, as well as the complete
camera, to tilt +15º / -15º with fixed increments of 5º. The AC-375 also extends
the telescopic rail system with 42mm extra travel.
Please read this manual carefully before converting your Actus-B, -G or –DB.
Please take all warnings concerning the use of standard Actus systems into
account when using an Actus fit with the AC-375 kit. Note that the AC-375 is
compatible with all three Actus systems so the images displayed in this manual
may differ from the Actus system you own.
1. Removing the Front standard
To remove the front standard [1],
unscrew the four M3x16mm or
M3x30mm (DB version) Torx bolts [2]
using the supplied Torx T10 key [3].
Note that the front standard of the
Actus-G and Actus-DB have an extra
16,3mm spacer (see fig 4. [1]) which is
not displayed in Figure 1.
Figure 1. Removing the front standard.
