5
4. Reassembling the front standard
Figure 4. Installing the spacers.(Left, Actus-B, Right, Actus-G and Actus-DB)
Before fixing the tilt unit to the front standard,
make sure the tilt unit is fixed
in the 0º position.
Keep the tilt unit fixed in the 0º position at all time during
assembly.
For the Actus-B
place the front tilt unit [8] below the front standard
and fix the tilt unit to the front standard with the supplied M3x12 DIN7991
bolts [9] by using the supplied 2mm Allen key [10]. After fixing the tilt unit to
the front standard, use the earlier removed M3x16 ISO14581 Torx screws [2]
and the Torx T10 key [3] to fix the tilt unit to the Actus rail.
For the Actus-G and
–DB
, after fixing the tilt unit to the front standard, fix the tilt unit and the
16,3mm spacer to the Actus rail with the earlier removed M3x30 ISO14581 Torx
screws [11] using Torx T10 key [3]
