PTP 820C Quick Start Guide
Page 17
Configuring the Link
The Web EMS provides wizards to configure radio links. The wizards guide you through configuration of the basic
radio parameters and services necessary to establish a working pipe link.
T
o configure a 1+0 link using the Quick Configuration wizard, select Quick Configuration > PIPE > Multi-Carrier
ABC > 2+0. Page 1 of the 2+0 Quick Configuration wizard opens.
1
2
3
Select an Ethernet interface or LAG for the link.
Click
Create LAG
to open a wizard that guides
you through the steps to create a LAG.
Select the Attached Interface type
for the service that will connect the
radio and Ethernet interfaces:
Select the first radio
interface for the ABC group.
s-tag
– All S-VLANs and untagged
frames are classified into the service.
dot1q
– All C-VLANs and untagged
frames are classified into the service.
Select the second
radio interface for the
ABC group.
Select the XPIC
checkbox.