Cambium Networks PTP 820 Series, Руководство по установке

Страница: 63 / 179

Installation Guide for RFU-D-HP
Page 63 of 179
Installing the Diplexer on the Radio
For configurations that use diplexers, RFU-D-HP is delivered as two separate components: a generic radio unit and a
diplexer unit. This section explains how to attach the diplexer unit to the radio unit.
Note: Mounting of the diplexer unit to the radio unit should be performed by certified
personnel in a clean, temperature and humidity-controlled environment.
List of Items
Ite
m Descripti
on Quanti
ty Marketing Model
1 RFU-D-
HP
RADIO
UNIT 1 See Section 0,
Note!
Refer to the product roadmap for availability of RFU-D-HP in a specific band, as well as the
availability of any specific mediation device.
Presenting a specific component in this manual does not indicate that it is available for ordering.
Please consult with your pre-sales engineer for specific component availability information.
Radio Unit
2 RFU-D-
HP
Diplexer
Unit 1 See Section Chapter 0, Diplexer Unit
Required Tools
•
Torque Wrench With Metric Hexagon Socket Key Wrench #4 (Allen Key
Procedure
1 Prior to the installation, remove the sticker which is covering the diplexer ports on the Diplexer unit and
the sticker that covers the TRX ports on the radio unit.
2 Position the diplexer unit on the radio unit so that the two location pins mounted on the TRX ports of
the diplexer unit (Figure 26) fit into the corresponding holes in the radio unit (Figure 27).