Release Notes
System Release 13.4
pmp-0979 - July 2015
Page
36 of
50
Note
-
With ‘SNMPv3 Only’ enabled, all SNMPv2c requests will be ignored.
-
Any user with the correct SNMPv2c community string can set these
parameters. It is recommended that SNMPv3 needs to be used for added
security.
2)
Enable SNMPv3 for AP/SM in
Configuration > Security > SNMPv3 settings
tab.
Table 35
SNMPv3 settings
Attribute
Meaning
Engine ID
The Engine ID is unique authoritative engine for each radio.
This attribute allows to configure Engine ID between 5 to 32
hex characters. The default ID is the MAC address of the
radio.
SNMPv3 Security Level
This field allows to configure security model where users are
defined and authenticated before granting access to any
SNMP service. Each device can configure the security level
of SNMPv3 to No authentication/No privacy,
Authentication/No privacy, or Authentication/Privacy.
SNMPv3 Authentication
Protocol
Currently, the SNMPv3 authentication protocol MD5 is
supported.
SNMPv3 Privacy Protocol Currently, the SNMPv3 privacy protocol CBC-DES is
supported.
SNMPv3 Read-Only User This field allows for a read-only user per devices. The default
values for the Read-Only users is:
Username = Canopyro
Authentication Password = authCanopyro
