Cambium Networks ePMP 1000, Руководство пользователя

Страница: 30 / 478

CAMBIUM NETWORKS
026v003
30
Web pages
The web-based management interfaces provide comprehensive web-based fault, configuration,
performance and security management functions organized into the following web-pages and
groups:
Access Point and Subscriber Module web-pages:

Dashboard: The Dashboard web-page reports the general device status, session status,
remote subscriber status, event log information, and network interface status.

Configure: The Configuration web-page may be utilized for configuring general device
parameters, as well as IP, radio, SNMP, Quality of Service (QoS), security, time, VLAN, protocol
filtering, and unit settings.

Monitor: The Monitor web-page reports detailed operating statistics for the radio link and
network, and reports system log information.

Tools: The tools web-page offers useful tools for device installation, configuration, and
operation including software upgrade, backup/restore, spectrum analyzer, throughput test,
ping test, and traceroute.

Quick Start: The Quick Start web-page provides quick access to requisite parameters for radio
link establishment and network access.
Identity-based user accounts
When identity-based user accounts are configured, a security officer can define from one to four
user accounts, each of which may have one of the four possible roles:
 ADMINISTRATOR (default username/password “admin”), who has full read and write
permission.

INSTALLER (default username/password “installer”), who has permission to read and write
parameters applicable to unit installation and monitoring.

HOME (default username/password “home”), who has permission only to access pertinent
information for support purposes

READONLY (default username/password “readonly”), who has permission to only view the
Monitor page.
SNMP
The management agent supports fault and performance management by means of an SNMP
interface. The management agent is compatible with SNMP v2c using one Management
Information Base (MIB) file which is available for download from the Cambium Networks Support
website (
https://support.cambiumnetworks.com/files/epmp ).
NETWORK TIME PROTOCOL (NTP)
The clock supplies accurate date and time information to the system. It can be set to run with or
without a connection to a network time server (NTP). It can be configured to display local time by
setting the time zone and daylight saving in the Time web page.
If an NTP server connection is available, the clock can be set to synchronize with the server time at
regular intervals.
ePMP devices may receive NTP data from a CMM3 or CMM4 module or an NTP server configured
in the system’s management network.