Cambium Networks ePMP 1000, Руководство пользователя

Страница: 109 / 478

CAMBIUM NETWORKS
026v003
109
Attribute Meaning
Operating Frequency The current frequency carrier used for radio transmission, based on the
configuration of the Frequency Carrier parameter (in DFS regions, if a
radar has been detected, this field may display either DFS Alternate
Frequency Carrier 1 or DFS Alternate Frequency Carrier 2).
Operating Channel
Bandwidth The current channel bandwidth used for radio transmission, based on
the configuration of the Channel Bandwidth parameter.
Transmitter Output
Power The current operating transmit power of the AP.
Antenna Gain The configured gain of the external antenna.
Country The current configured country code, which has an effect on DFS
operation and transmit power restrictions. Registered Subscriber
Modules will inherit this country code when registration is complete
(unless SM is locked to US region).
Access Point Mode TDD: The Access Point is operating in point-to-multipoint (PMP) mode
using TDD scheduling. The AP is able to GPS synchronize in this mode
(except when in Flexible mode).
ePTP Master: The Access Point is operating as a Master in point-to-point
mode. The AP does not support GPS Synchronization in this mode but is
able to provide significantly lower latency than other modes. QoS (MIR
and traffic priority) capability and Link Quality/Capacity indicators are
not available in this mode.
PTP: The Access Point is operating in point-to-point (PTP) mode using
TDD scheduling. The AP is able to GPS synchronize in this mode (except
when in Flexible mode).
Downlink/Uplink
Frame Ratio The current configured schedule of downlink traffic to uplink traffic on
the radio link. In other words, this ratio represents the amount of the
total radio link’s aggregate throughput that will be used for downlink
resources and the amount of the total radio link’s aggregate throughput
that will be used for uplink resources.
Wireless Security The current configured authentication type used for radio link encryption
as well as SM authentication.
cnMaestro Remote
Management Indicates whether the device is currently configured to be managed by
the Cambium cloud management system –
cn Maestro™.
cnMaestro
Connection Status The current management status of the device with respect to the
Cambium Cloud Server. When Enabled under Configuration->System,
the device will be managed by the Cambium Remote Management
System, which allows all Cambium devices to be managed from the
Cambium Cloud Server.