CAMBIUM NETWORKS
026v003
148
Attribute
Meaning
Broadcast Packet
Limit
Enabled: This allows the user to set the Broadcast Packet Rate below.
Configure this parameter to limit the amount of broadcast packets that
will be allowed on the ingress of the radio’s Ethernet port. Set the
packets per second value to limit the impact of events such as broadcast
storms.
Disabled: There is no limit on the amount of broadcast traffic that will
be allowed into the ingress of the radio’s Ethernet port.
Broadcast Packet
Rate
Set the packets per second value to limit the amount of broadcast traffic
that will be allowed on the ingress on the radio’s Ethernet port. The
packets per second limit can be set individually on each ePMP radio.
The range is 100 to 16000 packets per second. The default is 200.
Reliable Multicast
Enabled: This feature allows ePMP to support IGMP capable devices.
Once a multicast group is identified, the AP allows multicast traffic to be
sent only to the SMs within the multicast group. The SMs support up to
5 unique multicast groups. In addition, when this option is enabled, the
multicast traffic is sent to the SMs using the current Downlink MCS rate.
Disabled: ePMP will still support IGMP capable devices but the multicast
traffic will be sent using MCS 1 on the downlink to all SMs, regardless
of the multicast group.
IGMPv2 Fast Leave
Support
Disabled: AP will not drop any IGMPv2 Leave packets
Enabled: AP will drop/ignore IGMPv2 Leave packets from SMs if there
are other SMs downstream still subscribed to the IGMP group.
Advanced
IPv6 Support
Systemwide IPv6 Protocol Support. When enabled, appropriate IPv6
modules and services will be loaded.
Spanning Tree
Protocol
Disabled: When disabled, Spanning Tree Protocol (802.1d) functionality
is disabled at the AP.
Enabled: When enabled, Spanning Tree Protocol (802.1d) functionality
is enabled at the AP, allowing for prevention of Ethernet bridge loops.
Management Access
Ethernet: Only allow access to the AP’s web management interface via
a local Ethernet (LAN) connection. In this configuration, the AP’s web
management interface may not be accessed from over the air (i.e. from
a device situated below the SM).
Ethernet and Wireless: Allow access to the AP’s web management
interface via a local Ethernet (LAN) connection and from over the air (i.e.
from a device situated below the SM).
Caution
APs configured with AP Management Access Interface set to LAN and
WLAN are susceptible to unauthorized access.
Содержание ePMP 1000
