Chapter 1: About This User Guide
16
Note
There should be a drip loop immediately at the Ethernet port entrance going to the AP.
Training
The installer needs to have basic competence in radio and IP network installation. The specific
requirements applicable to the cnPilot Enterprise AP must be gained by reading this User Guide and by
performing sample setups at base workshop before live installments.
Power density exposure limit
This section includes the following topics:
l
Calculation of power density and distance
l
Calculated distances and power compliance margins
Install the radios for the 450 Platform Family of wireless solutions so as to provide and maintain the
minimum separation distances from all persons.
The applicable FCC power density exposure limit for RF energy in the 2.4 and 5 GHz frequency bands is 1
mW/cm2.
