CAMBER FSR SERIES, Руководство пользователя

Страница: 8 / 20

5
BIKE SETUP SPECIFICATIONS
BOLT SIZE / TOOLS / TORQUE SPECS
WARNING! Correct tightening force on fasteners (nuts, bolts, screws) on your bicycle is important
for your safety. If too little force is applied, the fastener may not hold securely. If too much force is
applied, the fastener can strip threads, stretch, deform or break. Either way, incorrect tightening
force can result in component failure, which can cause you to lose control and fall.
Where indicated, ensure that each bolt is torqued to specification. After your first ride, and
consistently thereafter, recheck the tightness of each bolt to ensure secure attachment of the
components. The following is a summary of torque specifications in this manual:
FSR PIVOT TORQUE SPECS:
LOCATION ALLEN KEY TORQUE (in-lbf) TORQUE (Nm)
Main (bottom bracket) 8mm 182 20.5
Dropout 5 / 6mm 113 12.8
S-Link @ seat tube
6mm 96 10.8
S-Link @ seatstay (outer) 6mm 152 17.2
S-Link @ Extension (inner)* 5mm* 96 10.8
Lower shock mount 6mm 175 19.8
Upper shock eye 6mm 113 12.8
Taco blade 4mm 104 11.8
*CAUTION: Reverse thread. Always remove the inner bolt first! Failure to remove the inner bolt first can
result in damage to the S-Link.
GENERAL TORQUE SPECS:
LOCATION ALLEN KEY TORQUE (in-lbf) TORQUE (Nm)
Seat collar 4mm 45 5.1
Water bottle boss 3mm 25 2.8
12mm rear axle 5mm 133 15.0
Derailleur hanger 4mm 35 4.0
Rear derailleur 5mm 70 7.9
Front derailleur 4mm 44 5.0
SWAT bezel bolts 2.5mm 6 0.7
Housing exit port 3mm 6 0.7
Frame protector 3mm 6 0.7
Chainstay protector 2.5mm 6 0.7
Rear brake housing guides 3mm 6 0.7
CAUTION: Ensure that all contact surfaces are clean and bolt threads are greased or have a
threadlocking compound (refer to the instructions for each bolt) prior to installation.
TOOLS REQUIRED
„
2.5, 3, 4, 5, 6, 8mm Allen keys
„
Torque wrench
„
High-quality grease
„
Blue threadlocker (Loctite 242)
„
Cable and housing cutters
„
High pressure shock pump