CAMBER FSR SERIES, Руководство пользователя

Страница: 11 / 20

8
EMT TOOL
The EMT Tool can be mounted two ways:
ALLOY FRAMES: Specialized Z Cage II / Cage-Mount Tool cradle
CAGE-MOUNT
TOOL CRADLE
1 2
„
Install the metal bracket into the Cage-Mount Tool cradle (the round hole goes into the cradle, the oblong hole
aligns with the Z Cage’s lower frame mounting hole).
„
Align the hole at the base of the Z Cage II over the hole in the Cage-Mount Tool cradle.
„
Insert the T-Nut into the Frame Tool cradle from below.
„
Thread the T-Bolt into the T-Nut. Torque the T-Bolt to 15 in-lbf (1.7 Nm).
„
Install the EMT tool into the cradle.
The EMT Tool with Cage-Mount Tool cradle and Z Cage II can be installed on many bike models.
Some frames are not compatible due to interference between the frame and the Cage-Mount Tool
cradle. Verify that the fit is unobstructed before installation.
The Z Cage II is available in left- or right-side bottle entry options.
CARBON FRAMES: Frame Tool cradle above the upper shock eye
FRAME TOOL CRADLE
1
A
2
„
Insert the tool into the cradle from an angle. As the tool slides into position, press the tool upward, making sure
the tool’s external pivot bolts are above the small retainer bumps (fig.2-A). Ensure that the tool clicks into place
at the back, to hold it in snugly.
„
Press up on the tool as it slides into the cradle until the tool clicks into place.
„
To remove the tool, apply upward pressure with a finger or two and pull the tool toward the head tube.