Caltta PR900 Скачать руководство пользователя страница 33

Страница: 33 / 37

secret

▲



Call alias
This option allows users to set the alias for the specified member. Range:1~14

characters.



Call Type
This option allows users to set the call type for the specified member.



Call ID
This option allows users to set the call id for the specified member.

Range:1~16776415.

6.1.7 Conventional Setting-Network-Network

Repeater IP



DHCP
This option allows users to define whether to dynamically assign the IP address to the

repeater.



Manual Set DNS
This option allows users to define whether to configure the DNS server. This server

saves the domain name and IP address of the master in the IP Multi-site Network, and it

can convert the domain name into IP address.



MAC Address
It displays the MAC address of the repeater. The MAC address, also known as the

hardware address, is a unique identifier for a network device.



IP address
This option allows users to set the Ethernet IP for the repeater.



Gateway IP
This option allows users to set the gateway IP under TCP/IP protocol for the repeater.



Netmask
This option allows users to set the subnet mask for the repeater.



DNS Server IP
This option allows users to set the IP address of the DNS server. Via the DNS server

IP, the slave can find the master. Moreover, the repeater SIP service can also be carried

out.

IP Multi-site Connect Setting



Repeater Type

Содержание PR900




































Результаты поиска

Содержание PR900

Отзывы:

Похожие инструкции для PR900

Бренды по названию

Популярные бренды

Caltta PR900, Краткое руководство пользователя

Результаты поиска

Содержание PR900

Отзывы:

Похожие инструкции для PR900

Бренды по названию

Популярные бренды