secret
▲
All rights reserved.No spreading abroad without permission of Caltta.
11
3.2Voice and Data Transfer
The receiving and transmitting frequency are different on the repeater. Repeater will
turn the weak receiving signal into strong transmitting signal and transmit on the same
channel. When transmitting, the “DATA”light is on. If it is analog signal, the “Ana.”light on.
if it is digital signal, the “Dig.”light flashes. The receiving and transmitting frequency and
CDCSS/CTCSS can be set by CPS.
An analog channel or a smart analog/digital detecting channel can be programmed
with one group of CDCSS/CTCSS encoding and decoding list. When receiving
CDCSS/CTCSS on the channel, repeater will transmit according to preprogrammed
CDCSS/CTCSS encoding and decoding list.
3.3IP Connecting
Default IP address
：
192.168.1.100. Application update, parameters configuration and
second development can be made through this port.
3.4Warning
When unusual situation happens, the alarm indicator ”ALM” will be enlightened. For
example, when Receiving Frequency unlocks, the warning light will flash once one second;
Transmitting frequency unlocks, the warning light will flash once two seconds; When both
transmitting and receiving frequency unlock, the alarm indicator ”ALM” will stay light on.
When the repeater occurs unusual situation, please let the related professional to
check and recover the repeater.
4 CPS-Menu
4.1File
Files refer to the configuration files of your Repeater, which are in .grd format.
The File menu includes the following functions:
Submenu
Description
Shortcut
Key
New
This function clears all the data in the current
window, restores it to the default setting, and
creates a new file.
Ctrl+N
Open
This function opens a data file from the hard disk
or other data media, for you to modify the file or
write it to your Repeater.
Ctrl+O
