Caltest CT4026, Руководство пользователя

Страница: 6 / 16

800-572-1028 caltestelectronics.com 1
1. Standard Probe Tip
2. Hands-Free Hook Probe Tip
3. Hands-Free Bolt-On Probe Tip
4. Grounding Lead Extension Cable
5. Grounding Alligator Clip
6. Trimmer Tool
7. BNC Cable
8. Frequency Compensation Trimmer
9. Main Grounding Lead
2 Using the Probe
1. Connect the probe to the BNC input of the oscilloscope.
2. On the oscilloscope, select the desired volts/division range.
Whenever available, set the probe attenuation ratio setting to 100:1.
3.
WARNING
If possible, always turn the high voltage source off
before connecting or disconnecting the probe.
4.
WARNING
Connect the probe grounding lead (via alligator clip) to
a good earth ground or reliable chassis ground.
5. For the best frequency response, when measuring frequencies
> 40 MHz use only the Main Grounding Lead plus the Grounding
Alligator Clip. (Figure 1). For frequencies < 40 MHz the Grounding
Lead Extension Cable may be used and will give you better reach with
the probe.
6.
WARNING
Before turning on the high voltage source, be certain
the operator is not touching any part of the device under test.