Installation
– recirculation mode
If you do not have an outlet to the outside, the exhaust pipe is not
required (as shown in the section “Installation - ducted”).
Installing the charcoal filter
An activated charcoal filter can be used to trap odours.
In order to install the charcoal filter, the grease filter should be
detached first. Press the lock and pull it downward.
Fit the activated charcoal filter onto the side of the motor and turn it in
a clockwise direction. Repeat the same on the other side.
NOTE:
-
Make sure the filter is securely locked in position. Otherwise, it
may loosen and become dangerous.
-
When the charcoal filter is attached, the extraction power may
be slightly reduced.
8
