background image

Page 8

• 

hold a cup below the dispense valve or place large vessels on the 

drip tray. Care must be taken to avoid injury through splashing or 

over-filling.

• 

To begin filling, enable the dispense valve by turning on the key 

switch (button will illuminate). Pressing the dispense button will 

allow water to flow from the valve.

• 

To stop filling, release the dispense button.

 NEVER PASS YOUR HAND BENEATH THE NOZZLE. 

 

Please retain these instructions for future reference

• 

Ensure that a suitable drip tray is positioned below the dispense 

valve. This will help keep the surrounding work surfaces and floor 

free from drips or splashes. Various options are available and are 

outlined on the Accessories page of this booklet.

• 

All de-scaling and servicing must be performed by a suitably 

qualified engineer.

GENERAL NOTES

GENERAL OPERATION

adhered to. This is to prevent health and safety issues, taste problems 

and potential damage to the appliance. Misuse of such chemicals is not 

covered by the product warranty.

The Quantum-e boiler benefits from an integral scale inhibitor, 

this is not

  

scale eliminator and its effects will differ according to the water quality 

in your area. To ensure trouble free operation, periodically check for 

scale inside the boiling chamber. The production of scale is a natural 

phenomenon and some de-scaling may be required within the first 12 

months. This is not covered under the products warranty as it is not a 

fault. If the water supply contains excessive solids in suspension it is 

recommended that a fine mesh “in line” water filter is fitted in the pipe 

work after the stop cock.

CLEANING

Avoid using any abrasive materials. Wiping the outer casing 

with a damp cloth should be sufficient. Some stainless steel 

cleaning products may not be suitable for plastic and must not 

come in contact with the plastic fascia. Always disconnect the 

electrical supply before cleaning. 

NEVER USE A SPRAY JET OR ANY OTHER METHOD WHICH COULD 

CAUSE WATER TO ENTER THE ELECTRICAL CHAMBER.

Содержание QUANTUM-e

























Отзывы: