background image

Page 7

The element(s) may be also be energized at the same time. If water is 

drawn from the machine but boiling water is still available, the Wait/Ready 

light will be illuminated solid yellow. If full draw off capacity is removed the 

boiler may cool, indicated by the Wait/Ready light flashing yellow.

Note:

When the green service indicator light on the front of the boiler is showing 

solid colour, the header tank sensor has been starved of water for in 

excess of 30 seconds and the bottom thermistor has been disabled. To 

reinstate normal operation the water supply needs to be re-applied.

If the service indicator light flashes, this indicates that the water level has 

reached the high level sensor and the likelihood is that the normal level 

sensor requires de-scaling, or the machine has over-filled due to debris 

trapped in the solenoid valve.The debris can be removed by drawing plenty 

of water from the dispense tap, causing the solenoid valve to operate and 

flush out the obstruction. The machine will reset itself once the problem has 

cleared. If this does not rectify the problem, turn off the water supply and 

remove the flexible hose to check for debris in the valve’s filter. When the 

service light is flashing, the element is disabled and the boiler may cool. 

For further assistance, contact our service department on 0113 249 6681,  

or e-mail [email protected].

The production of scale is a natural phenomenon and commonly occurs 

in hot water systems. The nature of the scale produced and its rate of 

formation varies widely throughout the country.

To ensure continuous, reliable operation, the boiler should be regularly de-

scaled by a suitably qualified engineer. Suitable chemical de-scalants must 

only be used if the manufacturers recommendations are strictly adhered 

to. This is to prevent health and safety issues, taste problems and potential 

damage to the appliance. Misuse of such chemicals is not covered by the 

product warranty.

The Kudos range of boilers benefit from an integral scale inhibitor. 

This 

is not

 a scale eliminator and its effects will differ according to the 

water 

quality in your area. To ensure trouble free operation, periodically check 

for scale inside the boiling chamber. The production of scale is a natural 

phenomenon and some de-scaling may be required within the first 12 

months. This is not covered under the products warranty as it is not a fault. 

SCALE

Содержание KUDOS 6 DUAL FLOW

























Отзывы: