Page 9
CLEANING
Avoid using any abrasive materials. Wiping the outer casing
with a damp cloth should be sufficient. Some stainless steel
cleaning products may not be suitable for plastic and must
not come in contact with the plastic fascia parts. Always
disconnect the electrical supply before cleaning.
NEVER USE A SPRAY JET OR ANY OTHER METHOD WHICH COULD
CAUSE WATER TO ENTER THE ELECTRICAL CHAMBER.
SCALE
The production of scale is a natural phenomenon and commonly
occurs in hot water systems. The nature of the scale produced and its
rate of formation varies widely throughout the country.
To ensure continuous, reliable operation, the boiler should be regularly
de-scaled by a suitably qualified engineer.
The Eclipse boiler benefits from an integral scale inhibitor,
this is not
a
scale eliminator and its effects will differ according to the water quality
in your area. To ensure trouble free operation, periodically
check for
scale inside the boiling chamber. De-scaling may be required within the
first 12 months. This is not covered under the product’s warranty as it is
not a fault.
GENERAL OPERATION
•
Hold a cup below the tap or place large vessels on the drip tray.
Care must be taken to avoid injury through splashing or over-filling.
•
To begin filling, pull the handle forward or push it backward – hot
water begins to flow. If the tap is opened fully it can be locked open
(for filling large vessels) in this state the boiler must never be left
unattended.
•
To stop filling, release the handle so it returns to the closed
position.
at operating temperature indicated by the Ready light being illuminated.
The full light will be illuminated only when the boiler is full of boiling
water. By pressing the symbol on the upper fascia label, the
economy feature is selected. This feature reduces the working capacity
of the appliance by approximately half.The full light will be disabled.
