Page 2
Page 3
CONTENTS
INTRODUCTION
Thank you for purchasing a Calomax Cascade boiler. All our
products are designed to give years of simple, reliable operation.
To ensure this, it is important that the installation and subsequent
servicing is carried out by a suitably qualified engineer in
accordance with these instructions.
For assistance in finding a suitable engineer in your area, visit our
web site www.calomax.co.uk or contact our service department on
0113 249 6681 or e-mail: [email protected]
INTRODUCTION
PAGE 3
CHECK LIST
3
APPROVALS
3
CONSTRUCTION
4
INSTALLATION
4
LOCATION
4
COLD WATER INLET
5
DIMENSIONS AND WEIGHTS
5
VENT / OVERFLOW
6
ELECTRICAL CONNECTIONS
6
USER INSTRUCTIONS
6
SCALE
7
GENERAL OPERATION
8
GENERAL NOTES
8
CLEANING
8
SERVICE INSTRUCTIONS
9/12/13
EXPLODED DIAGRAM
10/11
SPARE PARTS
14/15
ACCESSORIES
16
WIRING DIAGRAM
17
TROUBLE SHOOTING
18
WARRANTY
19
PRODUCT SPECIFICATION
20
CHECK LIST
Before commencing installation, check that the following parts have
been supplied with the boiler:
1. WRAS approved flexible water inlet hose suitable for
potable water.
2. Status label
3. Stainless steel drip tray
This product conforms to the CE marking directive 93/68/
EEC through compliance with the following standards:
Electromagnetic Compatibility Directive
Low Voltage Directive 73/23/EEC in accordance with:
BS EN 60335-2-63:1993
Compliance with these standards has been confirmed through
testing by an independent NAMAS approved body
Calomax products have been tested and found to comply with the
requirements of the Water Supply (Water Fittings) Regulations 1999
for England and Wales Water Bylaws 2000, Scotland and the Water
Regulations Ireland.
APPROVALS
