Paragon-X Getting Started Guide
Page 26 of 28
Additional information for Rev C and Rev D Converter:
Size: 140x35x105mm.
Weight: 320g.
Power Supply: USB 5Vdc/3W direct, or via supplied 100-254Vac/47-63Hz AC adapter (if ordered standalone).
Environmental Specifications: Same as Paragon-X.
The peak-peak frequency input to the converter should be in the range of 200mV – 3V into 50Ω. The
converter can accept either sinusoidal or square waveform. The frequency output is 1.5V peak to peak
square wave into 50Ω.
POWER GOOD
The POWER GOOD LED is on when power is supplied to the device. There is no power switch. Power
can be either from the supplied AC adapter or from an active USB port.
SW1 and SW2
These are the only controls on the device. Set these switches according to the table printed on the
rear panel and desired input/output frequencies. One example is 10MHz ‘in’ converted to 2.048MHz
‘out’ in order to perform a 10MHz wander measurement. The other settings are for 10>25MHz and
25>10MHz conversions.
