uPro
User
Guide
(v1.5)
©2011
Callaway
Golf
Company
Page
5
of
24
Flick - used to scroll through menu options (vertical or horizontal),
1.1.3 Button Descriptions
Power Button
– This button is used to power on and off the device when held for at least three seconds. It
is also used put the device into stand-by mode when pressed for 1 second. You can bring the device out
of stand-by mode by pressing the power or mode button again
Mode Button
– This button is used to switch between BasicMode, ProMode® (requires purchase and
download of additional content), and GoMode®
Optical Finger Navigation (OFN)
– The upro mx has a state-of-the-art Optical Finger Navigation button
which offers the user a powerful, flexible, and extremely precise method of navigating through the upro mx
user interface. You can use the OFN in the following scenarios:
When using AnyPoint, slide your finger across the OFN to move the position of the AnyPoint®
target point
When viewing any hole in ProMode, click once to engage the SmartView feature of your device
1.1.4 Other Inputs and Outputs
LED Indicator
- The uPro has an LED indicator that is used to provide status information. The blue LED
flashes when the uPro is in normal operation. The red LED indicates that the device is charging. A flashing
red LED indicates that charging is complete.
Note:
The red LED will not flash when charging is complete if the uPro is powered on. Please see
section 1.3 Charging the Callaway uPro for more information on charging.
Micro-USB Port
- The Micro-USB Port is used to connect the device to the your computer to access the
uxplore website for course downloads and updates. It is also used to charge the battery within the device.
Headphone Jack
- The uPro contains a small, 2.5mm headphone jack that allows connection of stereo or
mono headphones. Note that your upro mx does not come with headphones.
