upro
mx
User
Guide
(v1.0)
©2011
Callaway
Golf
Company
Page
14
of
24
Figure 9a: Fairway SmartView
Figure 9b: Green SmartView
The distances are constantly updating while in ProMode as your position changes. Additionally, the uPro
identifies your current position on the image of the course by displaying a red diamond character. As your
position changes, the uPro will continually update your position on the image as well.
2.7.2 Pan and Zoom
The uPro also allows you to zoom in and out and pan anywhere you like on the hole. There is a zoom
slider at the bottom of the touch screen which allows you to zoom in to any level you desire. You can also
double-tap the screen and it will automatically zoom in. To zoom out, you can double-tap the screen again.
If you wish to pan in any direction, you simply swipe up or down on the screen to view your desired portion
of the hole.
2.7.3 Displayed Distances in ProMode®
Depending on the zoom level, the number of features in view and the font size, it may not be feasible or
practical to show all distances at the same time superimposed on the image. The uPro’s software
dynamically determines what distances will be displayed and which ones will be hidden. A colored dot, or
reading point, located next to the distance reading is used to show the precise location corresponding to
the distance being shown. The table below illustrates the meaning of each of these colored coded reading
points:
