Calix ODC-3000, Руководство по установке

Страница: 100 / 136

100
Proprietary Information: Not for use or disclosure except by written agreement with Calix.
© 2001-2008 Calix. All Rights Reserved.
c. Verify that the far end of the subscriber interface cable terminates at the protector
panel for the related C7 slot.
7.
Repeat Steps 5 and 6 to connect additional cables between the splitter shelf (additional
slots) and the far endpoints, as required.
8. Dress and secure all cables to the equipment rack with cable ties every 6 to 8 inches.
To install the ADSL/POTS splitter cards
1.
Unscrew the two captive screws on the front cover panel of the splitter shelf. Remove
the cover and set it aside.
2. Pull the splitter card ejector tabs outward to the unlocked position.
3.
Align the splitter card with the slot guide rails (component side facing up), then insert the
card into the shelf.
4.
Push the card ejector tabs inward to the locked position to seat the card.
5.
Repeat Steps 2 through 4 to install additional cards in the splitter shelf as required.
6.
Re-install the front cover panel on the splitter shelf.