Calix E3-48C Скачать руководство пользователя страница 123

Страница: 123 / 225

123

Proprietary Information: Not for use or disclosure except by written agreement with Calix.



VLAN set to IGMPv2



IGMPv3 messages from the uplink router, are discarded. If the VLAN receives

an IGMPv2 REPORT/LEAVE from a GE interface or PON subscriber port,

the v2 message is processed but the IGMPv3 QUERYs continue to be

transmitted from the interface towards the subscriber.



IGMPv3 messages from the subscriber port are discarded and v2 General

Queries are sent every query cycle. Only the packets that match the operating

IGMP version are processed.



VLAN set to IGMPV3



If the VLAN receives an IGMPv2 message from the uplink router or GE or

PON subscriber port, it is discarded. Only the packets that match the operating

IGMP version are processed.



However, if a v2 report is received on an xDSL port, the xDSL interface

operation mode for the port changes from IGMPv3 to IGMPv2. In the absence

of v2 REPORTs, the interface transitions back to v3.



The IGMP version of the IGMP Query must match the provisioned VLAN setting in

the associated IGMP profile if the version setting is set to either “v2” or “v3”. If there is

a chance that a v2 querier may win an election upstream, use auto mode.



If there are mixed v2 and v3 hosts on GPON or Ethernet ports, use v2 for the IGMP

version setting.



Video Services supports IGMP Snoop for both IGMPv2 and IGMPv3 protocols

simultaneously coming from different ports.



Video Services supports IGMP Snoop for both IGMPv2 and IGMPv3 clients on the

same VLAN, providing services to both.



IGMPv3 provides the ability for a host to selectively request or filter traffic from

individual sources within a multicast group.



For IGMPv3 operation, only 1 source address per multicast group per VLAN is

supported.



Source-specific group records received within a v3 Report are processed if the following

conditions are met:



The VLAN operating version is IGMPv3.



The subscriber facing interface operating version is IGMPv3.



Only one source is specified in the group record.



The multicast address in the group record is within the provisioned SSM range.

Содержание E3-48C
































































































































































































































Результаты поиска

Содержание E3-48C

Отзывы:

Похожие инструкции для E3-48C

Бренды по названию

Популярные бренды

Calix E3-48C, Инструкция по применению

Результаты поиска

Содержание E3-48C

Отзывы:

Похожие инструкции для E3-48C

Бренды по названию

Популярные бренды