![background image](http://html1.mh-extra.com/html/calira/evs-34-12-ds-iu/evs-34-12-ds-iu_operating-instructions-manual_3458538038.webp)
38
Operating instructions
Electric-System EVS 34/12-DS/IU
CALIRA
Electronic GmbH & Co. KG
Lerchenfeldstr. 9 87600 Kaufbeuren
Tel.+49(0)8341/9764-0 Fax +49(0)8341/67806
Internet: http://www.calira.de
Email: [email protected]
contact 13 of the coupling plug with a flat sleeve to the negative input of the
EVS (Figure 19).
Connect the input current cable (red, 2.5 mm²) from battery I through contact 9
of the coupling plug with a flat sleeve to the positive input of the EVS (Figure
19).
Connect the negative cable for the refrigerator (blue, 2.5mm²) using a flat
sleeve to the negative refrigerator output of the EVS (Figure 19).
Connect the positive cable for the refrigerator (red, 2.5 mm²) using a flat sleeve
to the positive refrigerator output of the EVS (Figure 19).
Connect the positive cables from the consumers to the positive distribution
cable (Figure 20). Devices (other than the refrigerator) that need constant
voltage are connected to the continuous output (continuous positive).
Connect the negative cables from the consumers to the negative distribution
cable (Figure 19). We recommend that the negative cables for the electrical
loads are connected to the negative distributor in the same sequence from left to
right as the positive outputs are connected.
Connect the negative cables from battery II using a flat sleeve to the 4th and
11th flat connectors from the left of the negative distributor at the EVS (Figure
19).
Connect measuring cable B+ (red, 0.75 mm²) from battery II to the sensing
input B+ of the EVS (Figure 20). If the length is greater than 1 m, the cable
must be protected by a 2 A fuse close to the supply battery. This fuse serves
exclusively to protect the circuits.
Connect the positive cable from battery II to the positive Batt. II input of the
EVS (Figure 20).
Connecting the Refrigerator
Connecting Consumers
Connecting Battery II
The positive cables from battery II to the device
must be laid in such a way that they arenot
mechanically damaged or short-circuited!
Содержание EVS 34/12-DS/IU
Страница 45: ......