Loop Detector Installation Manual
1.
2.
Plug the loop detector into
the
matching connector on the gate opener c
ircuit
board. Green light blinks. Figure 1.
3.
Note: If
the
gate opens without an intentional trigger, downgrade the sensitivity until fixed.
Install the loop wire
(not included)
underground
.
I
f not already installed
, see instructions
below
.
Connect
the
loop wire to the
"LOOPDETECTOR"
terminal on
the
c
ircuit
board. Figure 1
4.
On the loop detector
,
t
urn
l
oop sensitivity from 0 to 7, a larger number indicates higher
sensitivity.
5.
Fin
is
hed.
Figure 1
CM9-604
