background image

4.0  Directions for Repackaging:

The unit is easily disassembled by reversing the above procedures and returning all 

components to their original locations in the transit case as shown in Figure 14.

1.  

Remove the radio

 and place in its transit case.

2. 

Detach the upper dish

 segment and place it in the transit case, centered and against 

the side foam wall, as shown in Figure 14.   

3.   Place the folded 

rain tarp

 on top of the upper dish to act as a cushion against the lower 

segment which will be placed on top of the upper segment.   

4.   Loosen the four wing nuts which attach the side arms.   Remove the 

side arms and 

radio arm

.   Set all three pieces aside temporarily.

5.   Remove the 

elevation adjustment assembly

.   Disconnect the elevation assembly 

upper wing nut and unthread the entire assembly noting that it utilizes left handed threads.   
Collapse the elevation assembly to its minimum length and place it in the appropriate slot in the 
transit case.

6.   Loosen the large nut which retains the lower dish and lift the dish out of the trunion forks.   

Place the 

lower dish

 segment into the case.   Exercise caution so that the wing nuts on the side of 

the dish do not tear the transit case foam.

7.   The two 

side arms

 are returned to their 

transit slots

 on the back of the dish and the 

radio arm

 is 

secured

 to the back of the antenna support arm using the   wing nut and washer.  

8.   Loosen the six thumbscrews on the 

trunion

 and lift it straight off the trunion post.   Place 

the trunion in the provided cavity.  

9.  The 

compass and inclinometer

 fit easily into the spaces adjacent to the dish.

10.   Replace the transit 

case cover

, ensuring that it is oriented properly.  Secure all six 

latches. Return the entire case to its 

upright

 position when desired.

11.  Roll the case to your 

transport vehicle

 and prepare to load it into the vehicle.  The 

six handles make vehicle loading fairly easy with two persons.  To reduce the amount of effort 
required to load the transit case into a vehicle the case may be flipped and rolled into a vehicle 
as shown in Figures 15 and 16.

23

Содержание 1292B





























Отзывы: