Califone DiggiDitto DC896, Руководство пользователя

Страница: 62 / 68

7. TROUBLESHOOTING
How is the remote control battery replaced?
The DiggiDitto™ remote control uses a CR2025 battery which
can be purchased at most electronics stores. To
change the battery:
1. Turn over the remote control so that the back
side faces up.
2. Push in the notch located on the side of the
battery holder and pull.
3. Replace with a new CR2025 battery.
Why is there no image?
ƒ
Make sure the cables and power cord are properly connected.
Check to make sure the power switch is turned on. It’s also
possible that the fuse needs to be replaced.
The image is bending; how is a straight image obtained?
ƒ
Adjust the camera position.
Why is the image out of focus?
ƒ
The object may be too close to the lens.
ƒ
The Focus may be at the maximum Zoom setting. Press
Zoom —.
ƒ
Try pressing Auto Focus.
ƒ
If you are in a damp climate, moisture may accumulate on
the lens. It will disappear gradually as the equipment warms
up.
Why is the image so dark?
ƒ
Lighting may be insufficient. Press LAMP to activate the side
lights then increase the brightness level.
62
califone.com