2.
1.
P
H
U
S
RELEASE
BUTTON
D.F.P.
Removing the detachable front panel (D.F.P.).
1. Turn the Power off.
2. Press the Panel Release Button.
3. Remove the D.F.P.
Attaching the detachable front panel (D.F.P.)
1. Insert the right side of the D.F.P. Into the
main unit.
Note:
The D.F.P. Must be attached into
the T-Joint.
Caution:
Do not insert the D.F.P from the left side. Doing so may
damage it.
The D.F.P can easily be damaged by shocks. After removing it,
place it in a protective case and be careful not to drop it or subject it
to strong shocks.
When the release button is pressed and the D.F.P is unlocked, the
car's vibrations may cause it to fall. To prevent damage to the
D.F.P, always store it in a protective case after detaching it.
The rear connector that connects the main unit and the D.F.P is an
extremely important part. Be careful not to damage it by pressing
on it with fingernails, pens, screwdrivers, etc.
Detachable Front Panel (D.F.P.)
Note:
If the D.F.P is dirty, wipe off the dirt with
soft, dry cloth only. And use a cotton swab
soaked in isopropyl alcohol to clean the socket
on the back of the D.F.P.
Socket
2. Press the D.F.P. on to the left side of
middle of D.F.P. until a click sound is
heard.
"
"
T-Joint
