24
USING THE POWER PRO™ TOP BURNERS
TO LIGHT THE POWER PRO™ TOP BURNER (if equipped)
Note: On most models there is a front and rear burner operated with independent knobs. When lighting these Top
Power Burners, make sure that you are using the intended knob for ignition and use of the front or rear burner.
Open the grill lid, remove the Power Pro™ Top Burner metal cover and push and turn the knob to the “HI” position. You
will hear a continuous clicking sound at the burner which is the ignition switch sending a spark to the flame electrode
mounted in the center of the burner. It may take several on/off rotations for gas to reach the burner. Once lit, turn the
control knob to desired setting. If the burner does not light within (5) seconds, turn the control knob to “OFF” and wait
5 minutes before attempting to light the burner again.
If after several attempts to light the burner are unsuccessful, you may attempt to match light the Power Pro™ Top Burner.
To Match Light the Power Pro™ Top Burner:
(see picture on page 21 for reference)
Attach the match to the lighter arm which is attached to the drip pan handle and light it.
As shown in the picture from the previous page, pass the lit match across the burner ports of the Power Pro™Top Burner
keeping your hand and face away from the burner area while pushing and turning the grill knob to the HI position.
You should hear and see the burner light.
If the burner does not light within 4 seconds, turn the knob to the OFF position and wait 5 minutes before attempting to
light the burner again.
Содержание CGP42-2G-1SR-L N WH
Страница 31: ......
