Caliber CGP42-2G-1SR-L N WH, Инструкции по установке и использованию

Страница: 20 / 32

18
ELECTRICAL CONNECTIONS
GENERAL
»
The Caliber Crossflame Pro Grill is equipped with a 110V electronic ignition system along with 12V panel lighting
and interior/exterior lighting. Included with each Pro Grill is an electrical box that is pre-wired and ready for connect-
ing to the 2 leads from the grill (110V(#2 in the illustration) and 12V(#1 in the liiustration)).
»
CART-GRILL HEAD INSTALLATION - For CART mounted grill models, the electrical connector box comes pre-
mounted to the back panel of the cart.
»
BUILD-IN ISLAND INSTALLATION - For ISLAND installation planning, mount the box in a well protected, dry
location near the rear of the grill where the box 12V and 110V leads will reach the connector leads from the grill.
»
There is a single 110V lead(#3 in the illustration) coming from the bottom of the supplied electrical connection box
which should be plugged into an installer provided GFI circuit in the grilling island enclosure or GFI wall outlet from
the grilling cart.
»
See the illustration below regarding wire connections for the Pro 42 & 60” Grill.
to 12vdc ConneCtoR
on GRiLL heaD
1
BaCk Mounts to WaLL
BeLoW GRiLL enCLosuRe
oR to CaRt inneR
BaCk paneL
fRoM GRiLL heaD
110vac
2
3
to 110vac Gfi