8
MAINTENANCE
1. Periodically check mounting bolts, knobs and fasteners for adequate tightness and function.
2. Application of a rust preventative and/or grease may be needed on exposed threads around
Knobs if extended periods of outdoor exposure are anticipated.
3. If play can be felt in any of joints, the bearing set may need adjustment. Remove rubber plug from bearing
cap and tighten bearing screw with 5 mm hex key. Photo 15a-c
REMOVE RUBBER PLUG FROM
BEARING CAP
TIGHTEN BEARING SCREW
WITH 5MM HEX KEY
NOTE: Over-tightening the bearing set can result in damage to the bearing races and will cause
reduced performance. Only tighten a little at a time and test often until play is eliminated.
Photo 15a
Photo 15b
Photo 15c
