5
7. Slide the Front and Rear Forks into the Rail Assembly as shown,
taking careful note of the orientation of each part. Photo 7
10. Loosen the Clamp Lock Knob, and slide the post of the Swing-Arm Assembly into it. When the
Shooting Rail assembly is at the desired height, firmly tighten the knob to lock it into place. Photo 10
Photo 7
8. Unscrew the top Knob on the Swing-Arm Assembly and remove
the top half of the Rail Clamp. Install the Rail Assembly as shown
and then replace the top of the Clamp and re-tighten the knob.
Photo 8
Photo 8
Rail Clamp
9. Unfold the Legs of the Chair by pushing firmly on the frame
and pulling on the cross-bar between the legs as shown. Photo 9
Photo 9
11. The DeadShot ChairPod is now fully assembled. Please read and understand the Usage instructions fully
before use. Photo 11
Photo 10
Clamp Lock Knob
Photo 11
Front Fork
Rear Fork
