Caldertech Squeeze 16 20 25 32 SDR 11, Инструкция по эксплуатации и технические характеристики

Страница: 10 / 14

10
Certificate of calibration.
•
This product has been inspected and tested in accordance with the
ISO9001 quality control systems and procedures in place at Caldervale
Technology Ltd, Dewsbury.
•
This product has no calibration period, periodic, safety inspections
should be carried out by the operator if in any doubt please contact the
manufacturer for further information
Decommissioning & Disposal Instructions
These give the instructions for decommissioning and disposal of the equipment and
confirm how it is to be taken out of service safely, in respect of the Essential
Health and Safety Requirements.
•
If a Maxifuse™ squeeze tool inclusive of the size ranges 16–125mm
has reached the end of its useful working life and cannot be
refurbished it must be disposed of through a licensed scrap or waste
disposal facility. Alternatively, a reverse engineering company could
be used to strip the equipment for recycling purposes.
•
Disposal is the responsibility of the Customer this can also be
achieved by returning the product back to the manufacturer